70B SYSTEM FOR SCAFFOLDING BST
ANGLE TIES
42.4mm dia. steel tube, hot-dip galvanized. Equipped with forged ferrule for angle tie installation in the frame U-section. Used for vertical reinforcement of the scaffolding.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WBST-01-A | 300/200 | - |
| WBST-01-B | 250/200 | - |
| WBST-01-C | 250/150 | - |
| WBST-01-D | 250/100 | - |
| WBST-01-E | 200/200 | - |
| WBST-01-F | 150/200 | - |
HAND RAIL POST
0.74m-wide post, made of 48.3mm dia. metal tube, hot-dip galvanized. Equipped with die forged locks for hand-rails and boards.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WBST-02 | - | - |
HAND RAIL POST WITH PLATFORM PROTECTION
0.74m-wide post, made of 48.3mm dia. metal tube, hot-dip galvanized. Equipped with die forged locks for hand-rails, boards and roofer’s nets installation. Used for scaffolding’s top level protection.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WBST-03-A | 1.100 | 7.500 |
| WBST-03-B | 2.000 | 11.400 |
LONGITUDINAL BOARD
A 150mm-tail and 30mm-think board made of pinewood. Edges of the board are bevelled. Used to protect scaffoldings’ longitudinal surfaces
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WBST-04-A | 1.500 | - |
| WBST-04-B | 2.000 | - |
| WBST-04-C | 2.500 | - |
| WBST-04-D | 3.000 | - |
HAND RAILS
Steel tube pressed over on both ends, hot-dip galvanized, with holes for its installation in hand-rail posts’ and frames’ locks.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WBST-05-A | 1.500 | 2.100 |
| WBST-05-B | 2.000 | 2.800 |
| WBST-05-C | 2.500 | 3.550 |
| WBST-05-D | 3.000 | 4.260 |
DOUBLE, SIDE HAND-RAIL
Hot-dip galvanized steel hand-rail. Used for protecting the front side of the scaffolding’s operating area. Installed onto the frame using a semi-link.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WBST-06 | - | 3.350 |
FRONT HAND-RAIL
0.74m-wide frame made of dia. 48.3mm tubes, hot-dip galva-nized. Equipped with integrated hand-rails. Used for protecting the front side of the scaffolding and the platform on its top level.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WBST-07 | - | 12.800 |
0.74 SIDE BOARD
A 150mm-tail and 30mm-thick board made of pinewood. Edges of the board are bevelled. Used to protect scaffolding’s front surfaces.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WBST-08-A | - | - |
HOOK ANCHOR
Made of 48.3mm dia. steel tube, hot-dip galvanized. Equipped with a special hook allowing the scaffolding to be anchored to a wall.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WBST-09-A | 0.450 | 1.700 |
| WBST-09-B | 0.750 | 2.670 |
| WBST-09-C | 1.100 | 3.850 |
ADJUSTABLE STEEL FOOT
Made of 33mm dia. threaded tubular bolt, measuring 150x150mm. Equipped with die forged nut with socket for the frame pipe installation, hot-dip galvanized. Used for compe nsation of terrain unevenness.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WBST-10-A | 0.500 | 2.950 |
| WBST-10-B | 0.700 | 3.510 |
EYELET BOLT
Galvanized steel bolt. Used for scaffolding anchoring to a wall. Available in following dimensions.
| Code | Dia | Size (m) | Weight (kg) |
|---|---|---|---|
| WBST-11-A | 12 | 230 | - |
| WBST-11-B | 12 | 300 | - |
35 CONSOLE
A steel element made of the U-section, hot-dip galvanized. Equipped with two semi-links used for installation to the scaffolding’s main frame and with a tubular link for handrails posts installation. Used for extending the scaffolding
width inwards by one additional 0.32-wide wooden/steel platform.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WBST-12 | - | 5.750 |
0.74 PLATFORM SUPPORT
A steel element made of the U-section, hot-dip galvanized. Equipped with two semi-links used for installation to the scaffolding’s main frame. Used to install the platform at any height of the scaffolding frame.
| Code | Size(m) | Weight |
|---|---|---|
| WBST-13-A | - | - |
TRUSS GIGDER
This truss is made of two 48.3mm steel tubes and angular and crosswise bracings, hot-dip galvanized. It is used to cross non-standard obstacles.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WBST-14-A | 3.200 | - |
| WBST-14-B | 4.200 | - |
| WBST-14-C | 5.200 | - |
| WBST-14-D | 6.200 | - |
| WBST-14-E | 8.200 | - |
ANGLE TIES
48.3mm dia. steel tube, hot-dip galvanized. Equipped with forged ferrule for angle tie installation in the frame Usection. Used for vertical reinforcement of the scaffolding.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WPLT-01-A | 300/200 | - |
| WPLT-01-B | 250/200 | - |
| WPLT-01-C | 200/200 | - |
| WPLT-01-D | 150/200 | - |
| WPLT-01-E | 250/150 | - |
| WPLT-01-F | 250/100 | - |
HAND RAIL POST
0.74m-wide post, made of 48.3mm dia. steel tube, hot-dip galvanized. Equipped with die forged locks for hand -rails curbs
| Code | Size(m) | Weight |
|---|---|---|
| WBST-02 | - | 3.300 |
HAND RAIL POST WITH PLATFORM PROTECTION
This is the basic load-bearing component of the scaffolding. 0.74m-wide frame made of dia. 48.3mm steel tubes, hot-dip galvanized. Equipped with star connecting bolt system to suspend two platforms and with locks for securing handrails, braces and barrier boards.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WPLT-03-A | 1.100 | 5.600 |
| WPLT-03-B | 2.000 | 10.400 |
LONGITUDINAL BOARD
A150mm-tall and 30mm-thick board made of pinewood, immersion - impregnated. Edges of the board are bevelled. Used to protect scaffoldings longitudinal surfaces.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WPLT-04-A | 1.500 | - |
| WPLT-04-B | 2.000 | - |
| WPLT-04-C | 2.500 | - |
| WPLT-04-D | 3.000 | - |
DOUBLE, SIDE HAND-RAIL
Hot-dip galvanized steel hand-rail. Used for protecting the front side of the scaffolding’s operating area. Installed onto the frame using a semi-link.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WPLT-05 | 2.500 | - |
HAND RAILS
Hot-dip galvanized steel tube pressed over on both ends, with holes for its installation in hand -rail
posts and frames locks.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WPLT-06-A | 1.500 | 2.100 |
| WPLT-06-B | 2.000 | 2.800 |
| WPLT-06-C | 2.500 | 3.550 |
| WPLT-06-D | 3.000 | 4.260 |
H - FRAME
0.74m-wide frame made of dia. 48.3mm steel tube, hot-dip galvanized. Equipped with integrated hand-rail. Used for protecting the front side of the scaffoldings and the platform on its top level.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WPLT-07 | - | 10.940 |
0,74 SIDE BOARD
A 150mm-tall and 30mm-thick board made of pinewood, immersion - impregnated. Edges of the board are bevelled. Used to protect scaffoldings front surfaces.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WPLT-08 | - | - |
ADJUSTABLE STEEL FOOT
Made of 38mm dia. threaded tubular bolt, measuring 150x150mm. Equipped with die forged nut with socket for the frame pipe installation, hot-dip galvanized. Used for compensation of terrain unevenness.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WPLT-09-A | 0.500 | 3.250 |
| WPLT-09-A | 0.800 | 4.250 |
HOOK ANCHOR
Made of 48.3mm dia. Steel tube, hot-dip galvanized. Equipped with a special hook allowing the scaffolding to be anchored to a wall.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WPLT-10-A | 0.450 | 1.700 |
| WPLT-10-B | 0.750 | 2.620 |
| WPLT-10-C | 1.100 | 3.850 |
EYELET BOLT
Galvanized steel bolt. Used for scaffolding anchoring to a wall. Available in the following dimensions.
| Code | Dia | Size (m) | Weight (kg) |
|---|---|---|---|
| WPLT-11-A | 12 | 230 | - |
| WPLT-11-B | 12 | 300 | - |
35 CONSOLE
A steel element, hot-dip galvanized. Equipped with two semi-links used for installation to the scaffolding’s main frame and with a tubular link for hand-rail posts installation.Used for extending the scaffolding width inwards or outwards by one additional 0.32-wide wooden/steel platform.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WPLT-12 | - | - |
70 CONSOLE
A steel element, hot-dip galvanized. Equipped with two semi-links used for installation to the scaffolding’s main frame and with a tubular link for hand-rails posts installation. Used for extending the scaffolding width inwards or outwards by two additional 0.32-wode wooden/steel platforms or one additional 0.65-wide aluminium & plywood platform, as well as to move the scaffolding along its vertical axis.
| Code | Size (m) | Weight (kg) |
|---|---|---|
| WPLT-13 | - | - |