PRESSED
COUPLERS
DOUBLE COUPLER - NORMAL
Used to connect two scaffolding tubes at right angles. These are critical components in the scaffolding structure and must be load bearing to resist both slip and distortion.
| Code | Sheet Thickness (mm) | For Tube OD (mm) | Weight (kg) |
|---|---|---|---|
| WPC-01 | 5 | 48.300 | 0.900 |
SWIVEL COUPLER - NORMAL
Used to connect two scaffolding tubes at any angle. These are key components in the structure and must be load bearing. The body is firmly riveted to permit rotation, still ensures the minimum further movement & maximum rigidity.
| Code | Sheet Thickness (mm) | For Tube OD (mm) | Weight (kg) |
|---|---|---|---|
| WPC-02 | 5 | 48.300 | 1.050 |
DOUBLE COUPLER
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-03 | 48.300 | - |
SWIVEL COUPLER
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-04 | 48.300 | - |
SWIVEL WEDGE COUPLER
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-05 | 48.300 | 0.670 |
LADDER CLAMP
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-06 | 48.300 | 1.570 |
HALF SWIVEL COUPLER
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-07 | 48.300 | 0.540 |
JOINT PIN
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WDFC-08 | 48.300 | 0.710 |
SWIVEL WEDGE COUPLER
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-09 | 48.300 | - |
LADDER CLAMP
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-10 | 48.300 | 4.495 |
DOUBLE COUPLER
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-11 | 48.300 | 0.670 |
SWIVEL COUPLER
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-12 | 48.300 | 0.700 |
HALF SWIVEL COUPLER
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-13 | 48.300 | 0.450 |
JOINT PIN
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-14 | 48.300 | 0.815 |
PUT LOG COUPLER
Used to connect two scaffolding tubes at right angles. These are critical components in the scaffolding structure and must be load bearing to resist both slip and distortion.
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-15 | 48.300 | 0.600 |
SWIVEL COUPLER
Used to join two scaffolding tubes externally end to end. A steel divider located centrally ensures equal insertion of each tube. They can be employed where tension joints are required.
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-16 | 48.300 | 1.070 |
GRAVLOC COUPLER
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-17 | 48.300 | 1.440 |
PUT LOG ADAPTER
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-18 | 48.300 | - |
SWIVEL WEDGE COUPLER
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-19 | 48.300 | 0.670 |
LADDER CLAMP
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-20 | 48.300 | 1.570 |
HALF SWIVEL COUPLER
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-21 | 48.300 | 0.540 |
JOINT PIN
| Code | For Tube OD (mm) | Weight (kg) |
|---|---|---|
| WPC-22 | 48.300 | 0.710 |
Board Retaining Clamp
Material SAE-1010
Finis: Hot Dip Galvanized / Zinc / Self
| Code | For Tube OD (mm) | Weight (kg) | ||
|---|---|---|---|---|
| Hot Dip | Zinc | Self | WPC-23 | 48.3 | 0.750 | 0.710 | 0.690 |
Ladder Clamp
Material S-235
Finis: Hot Dip Galvanized / Zinc / Self
| Code | For Tube OD (mm) | Weight (kg) | ||
|---|---|---|---|---|
| Hot Dip | Zinc | Self | WPC-24 | 48.3 x 60.3 | 0.540 | 0.525 | 0.500 |
Toe Board Coupler
Material SAE-1010
Finis: Hot Dip Galvanized / Zinc / Self
| Code | For Tube OD (mm) | Weight (kg) | ||
|---|---|---|---|---|
| Hot Dip | Zinc | Self | WPC-25 | 48.3 | 1.188 | 1.160 | 1.100 |
Sleeve Coupler
Material S-235
Finis: Hot Dip Galvanized / Zinc / Self
| Code | For Tube OD (mm) | Weight (kg) | ||
|---|---|---|---|---|
| Hot Dip | Zinc | Self | WPC-26 | 48.3 | 1.156 | 1.124 | 1.070 |
Fencing Coupler
Material SAE-1010
Finis: Hot Dip \ Galvanized / Zinc / Self
| Code | For Tube OD (mm) | Weight (kg) | ||
|---|---|---|---|---|
| Hot Dip | Zinc | Self | WPC-27 | 48.3 | 0.583 | 0.567 | 0.540 |